Wednesday, January 16, 2013

Faux Cathedral Windows Pincushion Tutorial

 
 
 
Well here it is...a tutorial for one of my favorite techniques...Faux Cathedral Windows. 
 
This method is very different from the traditional method.  It is done from beginning to end by machine and uses a fraction of the fabric needed when doing the traditional method. 
I also think that when done in the way I'm about to show you, the end product comes out more polished looking in a fraction of the time it would take to do this using the traditional method. 
 
It is a great method for beginners as it is a simple straightforward process
yet engaging enough for the long quilter too.  
 
For this tutorial I'm going to show you how to make a pincushion like the one shown above. 
 
 
 
 
SUPPLIES
 
(8) 2 1/2" squares in various prints for "foundations and windows"
(8) 2 1/2" squares for "frames"
Roxanne's Glue Baste-It
(1) 4 1/2" square for pincushion back
(2) 4 1/2" squares of fusible fleece (not pictured)
Polyester Fiberfill
(2) buttons (not pictured)
 
 
 
STEP ONE
 
Press your eight "frame" squares in half on the diagonal and press and
then select four squares from the print pile for your "foundations" (Pic 1).
 
Pic 1
 
STEP TWO
 
Using your Roxanne's Glue Baste-It, apply small dots of glue to one foundation as shown in Pic 2.

Pic 2
 
STEP THREE
 
Place one pressed "frame" onto the foundation matching corners and press into place (Pic 3).  Pay special attention to make sure all corners and points meet squarely. 
 
Pic 3
 
Repeat with the other half with another "frame" so that your unit now looks like Pic 4.

Pic 4
Repeat this step with the remaining three "frames" and  "foundations". 
 
 
STEP FOUR
 
Next sew 1/8" seam around all four glue basted units as shown in Pic 5. 


Pic 5
 
STEP FIVE
 
Arrange your four units as shown in Pic 6 and sew into a four-patch (Pic 7) and press. 

Pic 6
 
Pic 7
 
NOTE:  To reduce bulk in the center of your four-patch, it is important to spin the seams (Pic 8).
 
Pic 8
 
STEP SIX

Apply dots of glue to three corners of each of the four remaining print squares (Pic 9). 
These will become your "windows".


Pic 9
 
Next, place the "windows" atop each side of your four-patch unit, making sure their edges are 1/8" inch from the folded edge of the "frames"(Pic 10). Press each "window" in place.
 
Pic 10

STEP SEVEN
 
Trim away the fabric hanging off the edge (Pic 11).  

Pic 11
 
Then apply a few glue dots to the trimmed edge (Pic 12) and press.
 
Pic 12
 
STEP EIGHT
 
Apply several glue dots to the edge of the left "frame" of one "window" (Pic 13). 


Pic 13
 
Turn over the edge and press in place so that the outer end of the curve
starts/stops 1/4" from the outer edge of your four-patch unit (Pic 14). 
 
Pic 14
 
The inner end of the curve should just meet the center of the four-patch unit (Pic 15).
 

Pic 15
 Repeat this process for the other three "windows".  It should now look like Pic 15.
 
 
STEP NINE
 
Repeat the process from Step Eight for the right side of each "window".  Make sure to overlap the left curve when pressing down the right curve so that it leave no raw edge exposed (Pic 16).
 
Pic 16

 
STEP TEN
 
Using the thread color of your choice (matching or not), straight stitch down the edge of each frame as shown in Pic 17.  Be sure to sew to the ends of each point to permanently secure them.
 

Pic 17
 
It should now look like this (Pic 18).
 

Pic 18


STEP ELEVEN
 

 Next, iron the two 4 1/2" fusible fleece squares to the wrong side of the
4 1/2" backing square and the finished Cathedral Window unit.
 
Pic 19


 
With right sides together sew a 1/4" seam all the way around leave a 2" opening on one side and trim the corners (Pic 20).  Turn right side out.

Pic 20
NOTE:  Be sure to backstitch and the beginning and end of this seam.
 
 
 
STEP TWELVE
 
Lastly, stuff your pincushion and sew it closed (Pic 21). 


Pic 21
 
Add buttons if desired and you're done!
 
 Front and back views
 

 As you can see this is a quick and easy method for doing Cathedral Windows.  The windows are easily adjustable to any size...just like my large Cathedral Window Pillows which used 8 1/2" squares to make a 16" pillow.
 
 
One thing to note about how I made these pillows.  Instead of using 8 1/2" squares in the windows and having a bunch of waste trimmed off, I cut one 16 1/2" square (the measurement of one side of the Cathedral Window unit) and then cut it on the diagonal twice to create the four windows.  This rule would hold true with a unit size.
 
 
I encourage you to play around with  your color placements to. 
Be it coordinated or scrappy it doesn't matter.  Go wild!
 
 
Last thing to note about this technique, for a symmetrical finish you need to work in multiples of Cathedral Window units (aka four-patch units).  Otherwise you'll have one edge of your project looking one way and the other looking completeley different.  You can put those four-patch units together creating the "X" like I showed you or you can turn them one quarter turn and create a diamond with the lines created by the folds.  Either way works.  And don't forget to continue spinning your seams throughout.
 
 
I hope y'all have found this tutorial useful.  If something is unclear or you need further
clarification, feel free to send me an email with your questions and I'll answer
your back and tweak the tutorial post if needed.
 
Till next time...
 

Sunday, January 13, 2013

Busy Busy Busy

This morning I completed my newest Cathedral Window pillow!  Isn't it awesome?! 
I absolutely love it.  It doesn't match a thing in my house but I really don't care.
 
 
 
Here's a view of the backing I chose for it.  I wanted something with a warm
 and bright feeling and I think this fabric fits the bill pretty good.
 
 
 
Next on my agenda today was to start making a runner for my son. 
 
He recently moved into a new place and asked if I would make a table runner for the
top of an old hope chest I had given him.  How could I refuse? 
 
For a while I racked my brain, unable to decide what fabrics to use.  So much of what's in my stash is pretty girly, flowery...not very masculine at all.  Then I had my light bulb moment...SOLIDS.  I settled on solids because they are gender neutral. 
 
When he came home for a visit this weekend I asked him to pick five fabrics from the solids
I've been hoarding collecting in every color of the rainbow.  And this is what he chose...ACK.
 I was like "Seriously dude?  Are you tryin' to give me a brain aneurysm?" 
 
 
 
Never in my life would I have chosen those colors to go together...never in a million years.  But I gotta tell you.  The more I looked at this color combination, the more I kinda liked it.  After thinking for a while about what to make, I settled on another braid project and came up with this. 

 
 
Don't you just love it?!  I do.  I don't know why but those colors really do work well together. 
After I've quilted the runner this coming week, I plan to start on a lap quilt
for my son's couch using the same colors.
 
 
Well that's all for now but stay tuned because in the next day or so I'm going
to post a tutorial on the technique I used to make this pillow.
 
Till next time...

Friday, January 11, 2013

Another project to add...

 
to my ongoing Cathedral Window addiction

Thursday, January 3, 2013

Sometimes it pays to piddle around...

...and see what happens.
 
 
Piddlin' Brades
33"x39"
 
I'm amazed what piddlin' around with a charm pack
and a bit of background turned into. 

Wednesday, January 2, 2013

Saturday, December 29, 2012

My oh my how time flies...

What's been going on in my blog absence?
 
Let's see.  We lost heat around shortly after Thanksgiving.  Husband came home from working
out of town the week before Christmas and saved the day by fixing the heat.  Having a husband with "fix it" skills rocks!  Unfortunately the heat died again on Christmas Eve...the day my husband headed back to work.  Had rain and below freezing temperatures for Christmas day.  Heat fixed again two days after Christmas.
 
But hey...we had it easy compared to so many other people right now.  I seriously can't watch or read the news anymore.  It's too sad.  I seriously expected the world to implode on December 21st.
 
I and my son spent Christmas on the couch under quilts watching our favorite movies and we had a simple dinner...which was a good thing because while the ham was cooking, it was heating up the house at the same time.
 
And on Christmas Day our neighborhood hawk decided to pay a visit and 
I managed to capture this shot through the storm door.
 
 
 
And the rain and cold brought out the squirrels and TONS of cardinals too. 
Have I ever mentioned that I love squirrels?  Goofy little critters...
 


 
Can you spot all seven cardinals? There are two juvenile males and five females in the photo.  And they were only a small fraction of the birds we saw that day.  Frank and Jesse were in heaven.  They were dying to be let out the door to chase the birds.
 
 
Needless to say there hasn't been a ton of sewing going on.  Sitting in a cold quilting room does not inspire a lot of sewing.  I did manage to make a few things though.
 
I completed two clothesline rugs which went to new homes.  Both of which I forgot to take finished photoss of so here's the first one...in progress.  It was made using 3/4" x 40" strips.
 
 
 
And here is the second rug (thank you Donna for taking a photo and sending it to me).  This one was made from a batik fat quarter bundle that had been sitting around for the last couple of years.  I don't know why I ever bought because when I got home I didn't really like it.  But I have to say it made a beautiful rug.
 
 
 
During breaks from rug making, I made circles (from a charm pack I uncovered while looking for something else) using my Karen Kay Buckley Perfect Circle templates.  I could make circles all day long with those templates because they just always come out so perfect and.  I don't have a solid plan for them yet but I have a few ideas.
 
 
 
During those breaks I also managed to finish up the last of my triangle blocks.  I now have 150 of them plus a few extras.  Because this quilt is not from a purchased pattern, I'm having to work out issues as I go...like how many to go across and down.  I've laid it out this way but am now thing I want to turn it so the points will be at the top and bottom. 
 
 
 I plan to set the quilt with a solid color and put a solid border around that. I'm thinking a dark red would be nice...or maybe a brown or dark blue. Thoughts? 
 
 
NOTE FOR PIP:  STOP READING NOW AND DON'T SCROLL DOWN ANY FURTHER IF YOU WANT YOUR PILLOW COVER TO BE A SURPRISE
 
And finally,  last night I finished Pip's pillow cover that she won from me during the Sew Mama Sew Giveaway Day.  She asked for a pillow cover in blues and I know the pillow looks kinda purple but I assure you its blue...Periwinkle to be more precise.  I really really really LOVE this pillow cover!  I hope she will too.
 
 
 
In closing,  I hope y'all had a great Christmas.  And if I don't make it back here by New Year's, I hope you have a great one of them too.  Stay warm...or cool depending on where you live...and be safe. 
 
Talk at you again soon!
 

Monday, December 17, 2012

We have a winner!

The Quilters Gallery Blog Hop Giveaway winner is...
 
 

Congratulations!
 
 
And to everyone else...thanks for playing along. 
I wish I had something for each of you.